Why choose bagnoLusso freestanding baths?

All BagnoLusso’s Freestanding baths are made of high-quality raw materials, for example, on acrylic baths, we use Lucite PMMA acrylic sheet to make sure we get the best possible quality; on solid surface baths, we use Lucite PMMA unsaturated resin so our baths could last longer. Here we are going to list the main features of our Acrylic Freestanding Baths.

1. AluminiumPowder Mould–Higher Surface Quality.

All our baths are made of aluminium powder mould, which has better anti-wear, and smoother surface quality. Hence, our baths’ surface is smooth and shiny, eliminating any possible unevenness during the thermoforming process.

2. Sanitary-grade cross-linking acrylic.

We only use Lucite PMMA sanitary-grade cross-linking acrylic which gives our baths glossier surface finish, more durable, higher stain-resistance. The acrylic has a higher strength so we can polish our painting areas into same colour as acrylic white colour itself, which makes the bath with less colour difference, like truly one-piece freestanding.

3. Full-length Baseboard on Bottom and Wall –Higher Strength Structure.

All our baths are made with 12mm MDF as base board so the structure is strong enough to undertake all the load, from our factory test, our baths could take as much as 600KGS weight. The critical part on using base board is we must make sure the board and the acrylic are 100% bonded together, no delamination so the baths can have a longer service life.

4. Slim-rim or Ultra Slim-Rim Modern minimalist design

Our bathtubs are all designed following the trendy European designs. We are one of the earliest factories to adopt 25/30mm slim-edged designs. Now we even go 20mm, some special designs are only 10mm. Being slim will better match with the trendy European branded basins, toilets or taps so as to offer a complete modern premium bathroom solution for our clients.

5. Simple leg system.

Our bathtubs are supported with TWO solid steel bars, and FOUR adjustable leg system, which is strong in support and convenient in make an adjustment during installation. Simple & Strong!

6. One-piece Construction, Seamless Joint, no crack, no obvious colour variations.

7. Colour Could be customized.

Bathtub colours (both inner and outer baths, mainly outer baths) could be customized so our bathtub can better match the colour tones of other Bathroom furniture Or accessories.

MATT BLACK
GLOSSY BLACK OUTSIDE, GLOSSY WHITE INSIDE
GREY OUTSIDE, GLOSSY WHITE INSIDE

8. Stable, Durable

All our acrylic baths have been cured in the 60 degrees celsius oven for 12 hours so the whole structure is stabilized, making the bath’s structure and colour more durable.

Hence, getting a BagnoLusso bathtub is more economical in the long run, and it’s worry-free and hassle-free.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

en_USEnglish